Quadro SW-Version 4.1.x Manuel d'utilisateur télécharger pdf (Page 18)

QCM Installation Guide QCM Licensing

QCM Licensing

By default, each Quadro allows only one QCM (line) to be registered to it. This is because only one

free QCM license is included in a Quadro that can be used by a single extension at a time.

Please note: The free license does not allow the use of G.729 codec.

Once the free license is used by an extension, the subsequent QCMs (lines) can be registered to

the same Quadro only for a trial period of 45 days counted from the QCM installation day. After

this period expires, the QCM will require that the corresponding Quadro extensions use a license.

To allow more QCM (lines) to be used as extensions on a Quadro, an optional software feature key

should be purchased to expand the number of available licenses in multiples of 4 or 10 and enable

G.729 codec. To purchase a key, please contact your distributor. In your request, include the

Unique ID displayed on the Features page of the Quadro web management (see Figure 16).

Figure 16 The Features page on the Quadro

After receiving a software key, follow these steps to activate the feature. For more information on

Quadro feature keys and their activation, please refer to the Quadro online help.

1. Open the SystemÆFeatures page and click the Add button (see Figure 16).

2. Enter the key in the Feature Key text field and Click Save.

Once the key is inserted, the Features table will list the QCM upgrade and the number of QCM

licenses activated (see Figure 17).

Quadro Communications Manager (SW Version 4.1.x)

1 2 ... 13 14 15 16 17 18 19 20

Pas de commentaire

Quadro SW-Version 4.1.x Manuel d'utilisateur Page 18