Quadro Quadro4x Guide d'installation télécharger pdf (Page 30)

QuadroE1/T1 Manual-I: Installation Guide Configuring the QuadroE1/T1

Pattern requires the routing pattern. To make the specified call, the appropriate Call Code

should be dialed prior to the routing pattern. Only digit values and wildcard symbols are al-

lowed here:

• the "?" character stands for only one unknown digit

• the "*" character stands for any number of any digits.

• '[' , ']' , ',' and '-' are used to define a range or a quantity of numbers, e.g. 8546033[0-2]

means that the dialed number may be 8546033-0. -1 or -2 to match the specified pat-

tern; for 2[3,7], the dialed number may be 23 or 27 to match the specified pattern.

Number of Discarded Digits (NDD) specifies the number of digits that that should be dis-

carded from the beginning of the routing pattern. Leave the field empty if no digits need to be

discarded.

Prefix specifies digits that will be inserted at the beginning of the routing pattern. Leave the

eld empty if no digits need to be added. fi

Call Type gives a possibility to select the routing call type (PBX, IP, IP-PSTN or E1/T1). For

his example IP would be selected. t

Metric allows entry of a rating for the selected route in a range from 0 to 20. If no value is in-

serted into this field, 10 will be used as a default.

When two route entries match a user's dial string, the route with the lower metric will be pre-

erred. In this example the Metric field will be left empty. f

escription allows entry of short text, e.g. to name the path. D

ext will display the second page of the Local Routing Wizard N

QuadroE1/T1; (SW Version 2.4.x) 29

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 40 41

Pas de commentaire

Quadro Quadro4x Guide d'installation Page 30