Quadro Quadro4x Guide d'installation télécharger pdf (Page 35)

QuadroE1/T1 Manual-I: Installation Guide Appendix: PC DHCP Settings

4. Select Obtain an IP address automatically,

then click on Advanced

5. You will see the entry DHCP Enabled

6. Click OK three times to close all windows.

TCP/IP and DHCP under Windows 95/98/ME

1. Click the Start button. Choose Settings, then Control Panel

2. Double-click on the Network icon to open your Network window. Select the Con-

figuration tab

3. Click Add

4. Double-click on Protocol.

5. Highlight “Microsoft” under the list of manufacturers

6. Find and double-click on TCP/IP in the list to the right

7. The Network window will appear with the TCP/IP protocol now listed

8. Highlight “TCP/IP” and click on Properties

9. Select Getting IP address automatically to enable the DHCP functionality

10. Click OK

11. Windows will ask you to restart the PC. Click Yes

The TCP/IP installation is now complete and the DHCP functionality is enabled.

QuadroE1/T1; (SW Version 2.4.x) 34

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41

Pas de commentaire

Quadro Quadro4x Guide d'installation Page 35