Quadro Quadro16xi Guide d'installation télécharger pdf (Page 86)

Quadro Manual II: Administrator's Guide Administrator’s Menus

Quadro2x, 2xi, Quadro4x, 4xi, Quadro16x, 16xi; (SW Version 5.2.x) 85

The IP P Templates page consists of a table where

te cannot be

Add

can cr

ere the selected

tains several subpages for each

hones

the available IP phone templates are listed. The

systemdefault template in this table indicates the Quadro

default template for all IP phones. This templa

edited or deleted.

opens the Add Entry page where an IP phone template

be eated.

The Add Entry page includes the following text fields:

• Template Name text field indicates the name of the

template. This name will be visible in the Edit IP Line

Settings page when defining the template for the IP

phone.

• Description text field requires optional information

about the template.

Edit opens the Edit Entry page wh

template’s settings can be adjusted.

The Edit Entry page con

supported IP phone model for which the template can be

managed.

Fig. II-146: IP Phones Templates

Fig. II-147: IP Phones Templates – Add Entry

Aastra configuration page contains the following components:

by the user in order to reach a particular destination.

• Send Dial Plan Terminator – is used to switch a dial plan terminator or timeout. When the IP phone is configured to use a dial plan

(such as the pound sign (#)), the phone waits for 4 or 5 seconds after the handset is picked up or a key is pressed to place a

an incoming call on the BLF (Busy Lamp Field) monitored extension. If the

• Dial-Plan String – indicates a dial plan string used to match dialed digits from the handset to the certain actions, e.g. dialing.

status information of SIP URLs mapped as “Destination/Extension” on the

• Transfer on Onhook - is used to switch the call transfer when the handset is placed on hook.

will connect the newly arrived incoming call to the call on hold by pressing

Xfer button. When this option is disabled and you press the Xfer button, you will have an option to choose the call on hold to transfer the

newly arrived incoming call to, or to dial a new destination manually.

• Message LED for Dialog State/Missed Calls – when this option is enabled, the phone will indicate missed calls and changing dialog

states using the message LED.

• Dialtone during Hold - when this option is enabled and the call is held the caller gets dial tone. Otherwise there will be no dial tone after

pressing Hold.

• Do not Disturb – this selection allows you to manipulate with the IP phone DND service. When the *72 is selected from this list, the DND

service of the IP Phone and the DND service of the Quadro for the corresponding extension will be activated when enabling the DND

service from IP Phone. This option is recommended. When keyeventF_DND is selected only DND service of the phone will be activated

when enabling the DND.

• Record Missed Calls – when this option is selected, the information about the missed calls will be displayed on the IP Phone.

ny parameters not listed above or parameters defined in this page for other IP phone models can be found in the user’s manual of the

orresponding IP phone.

lease Note: Save changes before moving among the configuration pages.

Phones Logo

• Local Dial Plan – indicates the number and pattern of digits dialed

terminator

call.

Play a Ring Splash - is used to switch a "call waiting tone" when there is

host tone is idle, the tone plays a "ring splash".

Snom configuration page contains the following components:

Dialog-Info Call Pickup - is used to switch a subscription to the

programmable keys

• Call join on Xfer (2 calls) - when this option is enabled, you

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 149 150

Commentaires sur ces manuels

Pas de commentaire

Quadro Quadro16xi Guide d'installation Page 86

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes d'échange de locaux et de succursales (PBX) Quadro Quadro16xi